Bose® Wave SoundTouch Manual Do Proprietário

Connecting Other Equipment

When using a TV, DVD player, computer, video game or other audio 

source, you can enhance your listening experience by playing the 

audio device through your Wave

®

 SoundTouch™ music system.

Connecting an audio device to your Wave

®

 SoundTouch™ music 

system requires one of the following cables:

Male-to-male 3.5 mm stereo cable

Dual RCA male to 3.5 mm male stereo cable

To obtain the correct cable, contact Bose

®

 customer service or 

visit a local electronics store. See the contact information sheet 

included in the shipping carton.
To connect an audio device, such as your TV, to the system:
1.  Connect one end of the stereo cable to the output of the audio 

device.

Dual RCA to 3.5mm 

stereo cable

2.  Connect the other end of the cable to the AUx IN connector 

on the rear panel of your Wave

®

 SoundTouch™ music system.

3.  Press 

 on the remote control. 

 

The last source you were listening to will be active. 

4.  Press 

 once or twice to select the AUX input. 

 

The 

AUx source indicator should be displayed.

Note:  If an audio device is plugged into AUx IN, pressing 

  

will toggle between SoundTouch™ and the  

audio device.

5.  Press and hold 

 or 

 to adjust the volume.

Note:  If the volume level of your Wave

®

 SoundTouch™ music 

 system cannot be adjusted high enough, increase the 

 volume level of the connected audio device.

For private listening, plug the headphones into the headphone  

connector on the rear panel of the Wave

®

 SoundTouch™ music 

system. 
Note:  The system speakers are automatically muted when you 

plug in your headphones.

HEADPHONES connector

HEADPHONES cable 

(Headphones not included)

CAUTION: Long-term exposure to loud music may cause hearing 

damage. It is best to avoid extreme volume when using head-

phones, especially for extended periods.

Note:  The system speakers are automatically muted when you 

plug in your headphones.  The speakers will automatically 

unmute when you disconnect the headphones. Because 

headphone volume levels may vary from speaker vol-

ume levels, be sure to lower the volume of the Wave

®

 

 SoundTouch™ music system before connecting or 

 disconnecting  headphones.

Note:  If an alarm sounds while using headphones, it will sound 

through the system speakers.

To change the headphones volume:
Press and hold 

 or 

 to adjust the listening level of your 

headphones.