Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Perlick
  4. 24" C-Series Built-in Beer Dispenser - Solid Stainless Door - Right Hinge
  5. Instrução De Instalação

Perlick 24" C-Series Built-in Beer Dispenser - Solid Stainless Door - Right Hinge Instrução De Instalação

Download
Página de 10
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
4
perlick.com
NOTE: Wash tapping devices thoroughly. Flush beer and 
faucet lines, as well as the tapping device (keg coupler) with 
fresh water.
1.  Locate the dispensing head , black beer line(s), and 
hose clamp(s). Slide one end of each beer line onto 
the stainless steel tubes which protrude out the 
bottom of the dispensing head and clamp tight.
2.  Insert the beer line(s) through the hole in the counter 
top. Position the head in place and apply silicone 
around the base of the dispensing head. Fasten using 
the 4 chrome screws included with the dispensing 
head. Wipe off excess silicone to complete the seal.
3.  Using the 3/8” -thick foam pad included in the 
tapping kit and roll into a cylinder. From inside the 
cabinet, insert the foam tube up through the hole in 
the counter top until it is firmly against the insulation 
in the dispensing head. Cut away any excess foam 
that extends into the cabinet that extends into the 
refrigerator.