Lexmark 41G0100 Manual Do Utilizador
4
Close the printer top access cover, and then close the front door.
5
Depending on your printer model, touch Continue, jam cleared or press
.
202–203 paper jams
If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it
out.
out.
Note: Make sure all paper fragments are removed.
Paper jam in the fuser area
1
Open the front door.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front doors open
for more than 10 minutes.
for more than 10 minutes.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
component, allow the surface to cool before touching it.
2
Open the printer top access cover.
3
Determine where the jammed paper is located, and then remove it:
a
If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
out.
Note: Make sure all paper fragments are removed.
b
If the jammed paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper on each
side, and then gently pull it out.
side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Clearing jams
209