Lexmark 41G0100 Manual Do Utilizador
Checking the status of parts and supplies from the Embedded Web Server
Note: Make sure the computer and printer are connected to the same network.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as
four sets of numbers separated by periods, such as 123.123.123.123.
four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Device Status > More Details.
Saving energy
Using Eco
‑mode
Use Eco
‑Mode to quickly select one or more ways to reduce your printer's environmental impact.
1
From the printer control panel, navigate to:
> Settings > Settings >
> General Settings >
> Eco
‑Mode >
> select the setting you want
Use
To
Off
Use the factory default settings for all settings associated with Eco
‑Mode. This setting supports the
performance specifications for your printer.
Energy
Reduce energy use, especially when the printer is idle.
•
Printer engine motors do not start until a job is ready to print. You may notice a short delay before
the first page is printed.
the first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
•
Enable the automatic two
‑sided (duplex) feature.
•
Turn off print log features.
2
Press
.
Reducing printer noise
Use Quiet Mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings > Settings >
> General Settings >
> Quiet Mode >
> select a setting you want
Using C746x
74