Fujitsu MAM3184MC/MP Manual Do Utilizador

7 - 4

C141-E134-01EN

Sense data (4-03-xx), (4-40-xx), (4-44-xx), and (4-C4-xx) indicate one of the following:

•

 

A target sector could not be detected using the sector counter.

•

 

A seek process overran the specified time.

•

 

A write to a disk terminated abnormally.

•

 

An error occurred in power-on self-diagnosis.

•

 

A hardware error occurred inside IDD.

•

 

A drive error occurred.

The symptoms above are generally caused by an error in a PCA or DE.

For details of the sense data above, refer to the SCSI Logical Interface Specifications.

If sense data (1-1x-xx), (3-1x-xx) or (E-1D-00) occurs frequently in a specific block of a disk,
there is disk damage that was not recorded in the media defect list.  In this case, assign an alternate
block to the error-detected block using a REASSIGN BLOCKS command.  For an explanation of
the REASSIGN BLOCKS command, refer to the SCSI Logical Interface Specifications.

If this error occurs in different blocks, a PCA or DE is faulty.

For details of the above sense data, refer to the SCSI Logical Interface Specifications.

Sense data (5-2x-xx), (5-3D-00), (5-90-00), (B-47-xx), (B-49-00), (B-4D-xx) and (B-4E-00)
indicates one of the following symptoms:

•

 

An invalid or unsupported command was issued, or invalid or unsupported parameters were
specified.

•

 

A SCSI interface error occurred.

•

 

A parity error occurred in the SCSI bus.

If this error occurs, a PCA or the SCSI interface cable is faulty.

For details of the above sense data, refer to the SCSI Logical Interface Specifications.