Raymarine DS400 & DS500 Manual Do Utilizador

74

DS400 and DS500 Digital Fishfinders

If the transducer is equipped with a speed paddlewheel, the DS400/500 
calculates the speed of the boat through the water. The Speed Calibrate 
option enables you to adjust the displayed speed so that it matches your actual 
speed through the water. You can adjust the displayed speed from 1% to 
200%. 

If the sounder reading is too low, set Speed Calibration to more than 100%. If 
the sounder reading is too high, set Speed Calibration to less than 100%. This 
setting also calibrates the Log, Trip and paddlewheel distance.

If the transducer is equipped with a thermistor, the DS400/500 calculates the 
temperature of the water. The temperature calibrate option enables you to 
adjust the displayed temperature.in 0.1 degree increments of the temperature 
units you have assigned using the UNITS... parameter. (See page 71.) 

The simulator enables you to operate your display without data from the 
transducer, in order to become familiar with the sounder features and 
functions. You can set the simulator ON or OFF. You cannot select OFF when 
the unit is powered on without a transducer connected.

The area at the bottom of the Sounder Setup screen gives version information 
for the system. This area is informational only; it is not editable.

SW Version displays the software version of the DS400/500.

Serial Number displays the serial number of the DS400/500, which should 
also be marked on the label on the rear of the unit.