GE JGSP44 Manual Do Utilizador

1. Use a screwdriver to loosen the air shutter

screw.

2. Adjust the air shutters. The table below gives

the recommended initial air shutter setting.

Your final settings may vary.

7/16"
5/16"

LP Gas

Broil burner
Bake burner

Natural

Broil burner
Bake burner

3. Retighten the air shutter screw.

4. Turn on the bake or broil burner.

a. If  the flames are yellow, open the air

shutter more.

b. If  the flames blow away or flutter from the

burner close the air shutter more.

5. Checking the flame size.

5/16"
3/16"

If  the flame size is incorrect,

recheck all conversion steps.

6. When all adjustments are made and the results

are satisfactory:
a. Replace the orifice fitting cover
b. Replace the oven baffle (flame spreader)
c. Replace the oven bottom.

IN SOME CASES
1. With L.P. gas, some yellow tipping on the outer

cone is normal.

2. Foreign particles in the gas line may cause an

orange flame at first, but this will soon disappear.

SPECIAL NOTE:
To convert the oven back to natural gas, reverse the

instructions given in making L.P. Adjustments.

Once the conversion is complete and

checked ok, fill out the L.P. sticker and

include your name, organization and date

conversion was made.  Apply the sticker to the

range near the regulator to alert others in the

future that this appliance has been converted to

L.P.  If converting back to natural gas from L.P.,

please remove the sticker so others know the

appliance is set to use natural gas.

Check the inner cone

of the flame. It should

be approximately 1/2"

to 3/4"  long for the

oven and broil burners.