Zanussi ZE 76/3 W Manual Do Utilizador
3
CONTENTS
2222 003-97
Instructions for the User
Important Safety Information
2
Description of the Appliance
4
Operation
5
Before use
5
Control panel
5
Starting your appliance
5
Setting the temperature
5
Ambient Temperature Switch
5
The freezer compartment
5
Freezing fresh food
5
Frozen food storage
6
Thawing
6
Making ice cubes
6
Cold accumulators
6
Fresh food refrigeration
6
Movable shelves
7
Positioning the door shelves
7
CRISPÕN FRESH
7
Cool Check Guide
8
Hints and Tips
9
Maintenance and Cleaning
10
Internal cleaning
10
External cleaning
10
When the appliance is not in use
10
Changing the light bulb
10
Cleaning CrispÕn fresh filter
10
Defrosting
11
Something Not Working
12
Service and Spare Parts
13
Customer Care
13
Guarantee Conditions
14
Instructions for the
Installer
Technical Specification
15
Installation
16
Positioning
16
Rear Spacers
16
Electrical Connection
17
Door Reversal
18
18
Door reversal directions
1. Disconnect from the electricity supply.
2. Gently lay the fridge/freezer on its back with the
2. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
3. Remove the ventilation grill (D).
4. Remove the plug (F) from the ventilation grill (D)
4. Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
5. Unscrew the bottom hinge (E).
6. Remove the freezer door by releasing it from the
6. Remove the freezer door by releasing it from the
middle hinge (H).
7. Unscrew the middle hinge.
8. Remove the fridge door by releasing it from the
8. Remove the fridge door by releasing it from the
top hinge pin (G).
9. Remove the pin then mount these on the side,
after having removed the small plugs (I) which
should then be fitted on the opposite side.
10.Refit the fridge door and replace the middle hinge
to the left hand side.
11.Replace the door and bottom hinge (E) on the
opposite side.
12.Refit the grill (D) to the base of the product.
The doors can be aligned by adjusting the middle
The doors can be aligned by adjusting the middle
hinge.
The middle hinge can be adjusted horizontally, after
The middle hinge can be adjusted horizontally, after
having slackened the two screws with a screwdriver.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
G
H
I
I
I
E
F
D
F
F
F
Printed on recycled paper