Miele H 370 Manual Do Utilizador
Before using for the first time
Setting the clock
When the appliance is first connected
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" flash in the display.
Press buttons "f" and ")" at the
same time.
same time.
The following light up
– "12:00" in the display,
– the "+/–" button indicator light.
– "12:00" in the display,
– the "+/–" button indicator light.
While the indicator light between the
"+" and "–" buttons is still lit up, enter
the time of day in hours:minutes
using the "+" or "–" buttons.
"+" and "–" buttons is still lit up, enter
the time of day in hours:minutes
using the "+" or "–" buttons.
When the indicator light for the "+/–" but-
ton goes out, the time of day has been
set and the display will change at one-
minute intervals. The colon flashes.
ton goes out, the time of day has been
set and the display will change at one-
minute intervals. The colon flashes.
Cleaning the appliance
Oven interior
If there are any stickers on the floor
of the oven, baking trays, grill pan /
oven tray etc. these must be
removed before use.
of the oven, baking trays, grill pan /
oven tray etc. these must be
removed before use.
Wipe out the
oven interior
using
warm water and a little washing up
liquid. Polish dry with a soft cloth.
liquid. Polish dry with a soft cloth.
Do not close the oven door until the
oven interior is dry.
oven interior is dry.
Rinse the
accessories
.
New appliances
have a slight smell on
first use. Running the oven for at least
an hour at a high temperature will dissi-
pate this more quickly.
an hour at a high temperature will dissi-
pate this more quickly.
Turn the oven function selector to
"Fan Heat D".
"Fan Heat D".
While the indicator light for the "+/–" but-
ton is still on, alter the oven tempera-
ture.
ton is still on, alter the oven tempera-
ture.
Select the highest temperature with
the "+" button.
the "+" button.
Depending on model, the timer can
also be used to set the finish time.
also be used to set the finish time.
Ensure the room is well ventilated
during this process.
during this process.
Before using for the first time
14