Nokia N95 8 GB 002F0L5 Manual Do Utilizador
Códigos do produto
002F0L5
6
Switch the device on
1
Press and hold the power key.
2
If the device asks for a (U)PIN
code or lock code, enter it, and
press the left selection key. The
factory setting for the lock code is
12345.
code or lock code, enter it, and
press the left selection key. The
factory setting for the lock code is
12345.
Your device has internal antennas.
Note: As with any radio
transmitting device, avoid
touching an antenna
unnecessarily when the antenna is in use. For example,
avoid touching the cellular antenna during a phone
call. Contact with a transmitting or receiving antenna
affects the quality of the radio communication, may
cause the device to operate at a higher power level than
otherwise needed, and may reduce the battery life.
touching an antenna
unnecessarily when the antenna is in use. For example,
avoid touching the cellular antenna during a phone
call. Contact with a transmitting or receiving antenna
affects the quality of the radio communication, may
cause the device to operate at a higher power level than
otherwise needed, and may reduce the battery life.
1
Cellular antenna
2
Bluetooth
technology/wireless
LAN antenna
technology/wireless
LAN antenna
3
GPS receiver
Charge the battery
1
Connect a compatible
charger to a wall outlet.
charger to a wall outlet.
2
Connect the power cord
to the device. If the
battery is completely
discharged, it may take a
while before the charging
indicator starts scrolling.
to the device. If the
battery is completely
discharged, it may take a
while before the charging
indicator starts scrolling.
3
When the battery is fully
charged, the charging
indicator stops scrolling. Disconnect the charger from
the device, then from the wall outlet.
charged, the charging
indicator stops scrolling. Disconnect the charger from
the device, then from the wall outlet.
Tip: Disconnect the charger from the wall outlet when
the charger is not in use. A charger that is connected to
the outlet consumes power even when it is not
connected to the device.
the outlet consumes power even when it is not
connected to the device.
R1165_3G_GS_SGML.book Page 6 Thursday, September 27, 2007 9:39 AM