Fujitsu S510 Manual Do Utilizador

220

This section describes common problems that may occur during usage of the ScanSnap and how to 
solve the problems.
Before you call a repair service, perform simple troubleshooting steps in the table below.
If performing these troubleshooting steps does not resolve your problem, contact an authorized 
FUJITSU scanner service provider. 

The scanner cannot be 
turned on. 

Are the AC/USB cable and 
the AC adapter connected 
correctly?

Correctly connect the Power/USB 
cable.

Disconnect and then re-connect the 
Power cable.
(* Wait at least 5 seconds before 
reconnecting the Power cable)

Is the paper chute closed? 
(The scanner’s power is 
controlled by closing/
opening the paper chute.)

Open the paper chute.

Is Windows normally 
started up?
(This scanner’s power is 
controlled by turning on/off 
the computer.)

Wait until Windows has started up 
completely. 

 LED will turn off 

when Windows is starting up or in 
the sleeping mode.

Did you press the 
[POWER] button to turn off 
the ScanSnap? (The 
scanner can be turned off 
by pressing [POWER] 
button when the paper 
chute is opened.)

Press the [POWER] button.