Lexmark MX6500E Manual Do Utilizador

You can export configuration settings into a text file, and then import it to apply the settings to other devices.

From the Embedded Web Server, click Settings > Apps > Apps Management.

From the list of installed applications, click the name of the application you want to configure.

Click Configure, and then do either of the following:

To export a configuration to a file, click Export, and then follow the instructions on the computer screen to save
the configuration file.

Note: If a JVM Out of Memory error occurs, then repeat the export process until the configuration file
is saved.

To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured device.

Before importing the configuration file, you can choose to preview it first.

If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

Obtain the scanner IP address:

From the scanner home screen

From the TCP/IP section in the Network/Ports menu

By printing a network setup page or menu settings page, and then finding the TCP/IP section

Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Open a Web browser, and then type the scanner IP address in the address field.

From the Embedded Web Server, click Reports > Device Settings.

Scroll down until you see “Embedded Solutions” (usually found near the bottom).

In the Embedded Solutions section, note the value next to “Framework =”. This signifies the installed version.

Appendix

16