Lexmark 24TT210 Manual Do Utilizador

Página de 390
Reports menu
To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > Reports
Network/Ports > Network [x] > Network [x] Setup > Reports
Use
To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.
Network Card menu
To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > Network Card
Network/Ports > Network [x] > Network [x] Setup > Network Card
Use
To
View Card Status
Connected
Disconnected
View the connection status of the wireless network adapter.
View Card Speed
View the speed of an active wireless network adapter.
Network Address
UAA
LAA
View the network addresses.
Job Timeout
0, 10–225 seconds
Set the amount of time it takes for a network print job to be canceled.
Notes:
“90 seconds” is the factory default setting.
A setting value of 0 disables the timeout.
If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.
Banner Page
Off
On
Allow the printer to print a banner page.
Note: Off is the factory default setting.
TCP/IP menu
To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > TCP/IP
Network/Ports > Network [x] > Network [x] Setup > TCP/IP
Note: This menu is available only in network printers or printers attached to print servers.
Use
To
Set Hostname
Set the current TCP/IP host name.
Note: This can be changed only from the Embedded Web Server.
Understanding the printer menus
167