Nortel Networks 1750 Manual Do Utilizador
62 Chapter 4 Management IP interface configuration
NN46110-316 03.01
Required information
Before you configure the management interface, collect the following
information:
information:
•
IP address for the management interface
The management IP address must be accessible from one of the private
physical interfaces on the VPN Router 1750. For example, if you plan to
assign IP address 10.2.3.3 with subnet mask 255.255.0.0 to the private
physical interface, the management IP address must reside in the 10.2
network.
physical interfaces on the VPN Router 1750. For example, if you plan to
assign IP address 10.2.3.3 with subnet mask 255.255.0.0 to the private
physical interface, the management IP address must reside in the 10.2
network.
•
subnet mask
The subnet mask specifies which IP addresses are directly reachable on the
network and which ones must be routed through a gateway. For example, the
IP address 10.2.3.3 with a subnet mask of 255.255.0.0 indicates that all hosts
with addresses 10.2.n.n are directly reachable.
network and which ones must be routed through a gateway. For example, the
IP address 10.2.3.3 with a subnet mask of 255.255.0.0 indicates that all hosts
with addresses 10.2.n.n are directly reachable.
•
default gateway (optional)
The default gateway routes packets to destinations for which no specific route
exists in the routing table. You can configure a default gateway when you
assign the management IP address, or you can configure it at a later time.
exists in the routing table. You can configure a default gateway when you
assign the management IP address, or you can configure it at a later time.
Note: Write down and save the management IP address. You need the IP
address to configure the VPN Router 1750.
address to configure the VPN Router 1750.