Fujifilm S8100 Manual Do Utilizador

41

Z Connecting

Z Others

Connecting to TV

There is no image 
or sound on the 
TV.

The camera is not connected to the TV 
correctly.

Connect the camera and TV correctly.

The included A/V cable was connected 
during movie playback.

After the movie playback mode is stopped, 
connect the camera and TV correctly.

“TV” is selected as the TV input.

Set the TV input to “VIDEO”.

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

The TV volume is turned down.

Adjust the volume.

The TV image is 
black and white.

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

Connecting to PC

PC does not 
recognize the 
camera.

The USB cable is not correctly connected 
to the PC or camera.

Set up the camera, and connect the USB cable 
correctly.

Connecting to 
printer

Cannot print with 
PictBridge.

• The USB cable is not correctly 

connected to the printer or camera.

• The printer is not turned on.

• Set up the camera, and connect the USB cable 

correctly.

• Turn the printer on.

Camera operation 
etc.

Nothing happens 
when pressing the 
buttons on the 
camera.

Camera malfunction may be caused 
temporarily.

Briefly remove the batteries or disconnect the AC 
power adapter. Then reload the batteries or 
reconnect the AC power adapter and try again.

The batteries have run out.

Load new or fully charged batteries.

The camera no 
longer works 
correctly.

Camera malfunction may be caused 
temporarily.

Briefly remove the batteries or disconnect the AC 
power adapter. Then reload the batteries or 
reconnect the AC power adapter and try again. If 
you think the camera is faulty, contact your 
FUJIFILM dealer.

L310GB.book  Page 41  Thursday, January 17, 2008  9:44 PM