Fujifilm S20 Pro Manual Do Utilizador
25
Using
the Camera
Press the Shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. At that point, the AF frame on the
screen becomes smaller and the camera sets the
shutter speed and aperture (the indicator lamp
(green) stops blinking and remains lit).
short double-beep is heard, the camera focuses on
your subject. At that point, the AF frame on the
screen becomes smaller and the camera sets the
shutter speed and aperture (the indicator lamp
(green) stops blinking and remains lit).
●
!
The image shown on the screen before taking the picture
may differ in its brightness, color, etc. from the image actually
recorded. Playback the recorded image to check it (
may differ in its brightness, color, etc. from the image actually
recorded. Playback the recorded image to check it (
➡P.29).
●
!
If the camera does not emit a short double-beep and “
{
”
appears on the screen, the camera cannot focus.
●
!
Pressing the Shutter button down halfway, the image on the
screen freezes temporarily. However, this image is not the
recorded image.
screen freezes temporarily. However, this image is not the
recorded image.
●
!
If “
{
” appears on the screen (e.g. the shot is too dark for
the camera to focus), try standing about 2 m (6.6 ft.) from the
subject to take the picture.
subject to take the picture.
8
Bebeep
２５０
２５０ Ｆ５．６
Click
Press the Shutter button down fully without
releasing it. When a clicking noise is heard, the
camera records the image.
releasing it. When a clicking noise is heard, the
camera records the image.
●
!
There is a slight delay between the Shutter button being
pressed and the picture being taken. Playback the shot to
check the image.
pressed and the picture being taken. Playback the shot to
check the image.
●
!
When pressing the Shutter button down fully in one motion,
the picture is taken without the AF frame changing.
the picture is taken without the AF frame changing.
●
!
Taking the picture, the indicator lamp lights orange (shooting
disabled). The indicator lamp then changes to green to
indicate that the next picture can be taken.
disabled). The indicator lamp then changes to green to
indicate that the next picture can be taken.
●
!
The indicator lamp blinks orange while the flash is charging.
The monitor may go dark briefly. This is normal.
The monitor may go dark briefly. This is normal.
●
!
See P.111-112 for information on the warning displays.
9
Frame the shot so that the subject fills the entire AF
(Auto Focus) frame.
(Auto Focus) frame.
7
●
!
If the subject is not in the AF frame, use AF/AE lock to take
the picture (
the picture (
➡P.27).
ＡＵＴＯ
ＡＵＴＯ
３３
３３
◆
Support for a cable release
◆
●
!
Do not apply excessive force to a cable release that is
attached to the camera, as this could damage the camera.
attached to the camera, as this could damage the camera.
A mechanical cable release can be used with this
camera.
Camera shake can be prevented by using a tripod
(sold separately) and cable release (sold separately).
camera.
Camera shake can be prevented by using a tripod
(sold separately) and cable release (sold separately).
Compatible cable releases:
ISO 6053:1979-compliant cable releases
ISO 6053:1979-compliant cable releases