Alliance Laundry Systems Drying Tumbler 110 Pound Capacity Part No. D0583 Manual Do Utilizador
Page 23
BASKET ALIGNMENT FOR DRYERS WITH GEAR MOTOR
Jacket Rear View
BASKET TOO LOW
If there are shims under Bearing B;
1. Loosen bolts
2. Remove shim(s).
3. Tighten bolts - check alignment.
2. Remove shim(s).
3. Tighten bolts - check alignment.
If there are no shims under B;
1. Loosen bolts on bearing A.
2. Add shim(s) under bearing A.
3. Tighten bolts - check alignment
4. Repeat until aligned.
2. Add shim(s) under bearing A.
3. Tighten bolts - check alignment
4. Repeat until aligned.
BASKET TOO HIGH
If there are shims under A;
1. Loosen bolts
2. Remove shim(s).
3. Tighten bolts - check alignment.
2. Remove shim(s).
3. Tighten bolts - check alignment.
If there are no shims under A;
1. Loosen bolts on bearing B.
2. Add shim(s) under bearing B.
3. Tighten bolts - check alignment
4. Repeat until aligned
2. Add shim(s) under bearing B.
3. Tighten bolts - check alignment
4. Repeat until aligned