PYLE Audio 7505-BTSDCM Manual Do Utilizador

Página de 406
Chapter 3: Get To Know The Ikôn
Battery Safety
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
37
3.2.1
Battery Safety
3.2.2
Removing The Battery Pack
Refer to “Preparing The Ikôn For Operation” on page 11 for more details about removing 
and installing the battery.
3.2.3
Battery Swap Time
Assuming the default power saving parameters and battery reserve level have not been al-
tered, battery swap time is approximately 5 minutes – you will not lose data if the battery is 
replaced within this time frame.
To protect data, the safest place to store data is on a microSD memory card or externally to 
the device on a USB memory stick or on a PC.
The Suspend Threshold feature allows you to determine the battery capacity at which the 
Ikôn will be shut down. If left at the default value, Maximum Operating Time, the Ikôn will 
run until the battery is completely empty; the RAM is only backed up for a short period of 
time. If you choose Maximum Backup Time, the Ikôn shuts off with more energy left in the 
battery so RAM can be backed up for a longer period of time.
(Refer to “Suspend Threshold And Estimated Battery Backup” on page 168 for details about 
reserving battery power for data backup purposes.) 
3.2.4
Charging The Battery
Batteries shipped from the factory are charged to approximately 40% of capacity. They must 
be fully charged prior to use. 
Important: Before attempting to install, use or charge the battery pack, it is critical that 
you review and follow the important safety guidelines in the quick refer-
ence guide entitled ‘Ikôn Rugged PDA Regulatory & Warranty Guide’, 
PN 8000148.
Important: Always shut down the Ikôn before removing the battery. To safely remove the 
battery, press and hold down the Power button. Choose “Shutdown” in the 
‘Shutdown’ screen and tap on OK.
Keep in mind also that all Ikôns are equipped with internal super-capacitors 
that will save the current data for up to 5 minutes while the battery 
is swapped.