Toshiba 46G310U Manual Do Utilizador

Chapter 6: Using the TV’s features

Note:

See page 24 for details on configuring

the antenna input.

•

Turning off the TV will clear the History List.

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be

handled for analog and digital channels when the TV

is in Antenna mode.
Note:

To use this feature, the Input Configuration

must be set to Antenna ( page 24).

The channel tuning mode has three options.

Mode

Description

Standard

Both analog and digital channels can
be tuned normally

Auto
(default)

Digital channels will have priority when
manually entering a channel number
using the Channel Number (0-9) on the
remote control, analog channels can
still be tuned by

, if available

Digital

Only digital channels can be tuned

To set the Channel Tuning Mode:

1無

From the

Setup menu, highlight Installation and

press

. A new set of

Installation menu icons

will appear.

2無

Open the

Terrestrial menu, highlight Channel

Tuning Mode, and then press u to select your

desired mode.

Note:

• The Channel Options windows as well as

the Channel Browser ANT/CABLE list will be

updated automatically when you change the

mode. Also, the History List will be cleared, but

the Favorites List will be saved.

• Even if the Channel Tuning Mode is set to

Digital

, analog channel 3 will still be the

default channel to prevent the initial case

where no digital channels have been found in

prior channel scans. (Channel Options will not

have anything listed until a scan is done.)

Tuning to the next programmed

channel

To tune to the next programmed channel:

Press

on the remote control or TV control

panel.

Note:

This feature will not work unless you

program channels into the TV’s channel memory

( page 25).

Tuning to a specific channel

(programmed or unprogrammed)

Tuning analog channels:

Press the Channel Number (0–9) on the remote
control. For example, to select channel 125, press 1, 2,
5, then

Tuning digital channels:

Press the Channel Number (0–9) on the remote
control, followed by the dash (

) button and then

the sub-channel number. For example, to select digital
channel 125-1, press 1, 2, 5, –, 1, then

Note:

If a digital channel is not programmed—

either through the automatic channel scan (

page 25) or the Channel add function ( page

26)—you will have to tune the RF channel using

the Channel Number and dash ( ) on the

remote control.

Switching between two channels

using Channel Return

The Channel Return feature allows you to switch

between two channels without entering an actual

channel number each time.

1無

Select the first channel you want to view.

2無

Select a second channel using the Channel

Number buttons (and the dash (

) button if

selecting a digital channel).

3無

Press

on the remote control. The previous

channel will display. Each time you press

, the

TV will switch back and forth between the last two

channels that were tuned.

Note:

If you press

from a non-antenna

input, the TV will return to the last-viewed input.

(continued)