Panasonic PV-HS3000 Manual Do Utilizador

Searching for Your
Component’s Code

Turn on your TV with the Hard Disk
Recorder off.

Hold down

CODE SET

until the remote’s red

LED blinks twice, then release.

Press

Slowly alternate between pressing

POWER*

and

until your TV turns OFF.

• Make sure that the Hard Disk Recorder remote is

aimed at your TV during the search.

• You may have to press this sequence of buttons

(

POWER*

then TV) up to 100 times to search the

entire library of codes.

When your TV turns OFF, press

CODE SET

to lock in the code for your TV.

• Your Hard Disk Recorder remote is now

programmed to operate your TV.

If you are searching for your VCR, or DVD player code,
you may want to use

PLAY

instead of

POWER

to search

for your code. When your VCR starts to play, press

CODE

SET

to lock in your code.

NOTE

• To search for the codes of your other components, repeat

steps 1~6, and substitute the appropriate device button (

SAT/CABLE

, or

VCR/DVD

) for the component.

Red LED

CODE SET

POWER

VCR/DVD

SAT/CABLE

Number
Buttons

2
5

3
6

PLAY

If your component does not respond to the Hard Disk Recorder remote
after trying all of the codes listed for your brand, or if your brand is
not listed, try searching for your code.

For example, if you try all of the codes for your TV and cannot get the
Hard Disk Recorder remote to operate your TV, follow steps below.

PanaHDR- P42-.p65

00/12/01, 16:40