Vidikron Vision 10 Manual Do Utilizador
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
47
PRE
L
IMINAR
Y
ICC Adjust: Use the ICC Adjust controls to customize the stored NTSC, HDTV and/or PAL
color space characteristics. To do this:
color space characteristics. To do this:
1.
Select ICC Adjust from the ISF Calibration menu and press ENTER.
2.
Select the color space to modify using the left- or right-arrow buttons.
3.
Select a component color (Red, Green, Blue, Cyan, Yellow or Magenta).
For each component color, you can adjust the following:
• Intensity: This slidebar adjusts the intensity -- also known as luminance -- of a given color.
• Saturation: This slidebar adjusts the color saturation level -- the amount of that color in a
video image. Lower settings produce less saturated colors; a setting of “-64” removes that
color from the image entirely. If the saturation is too high, that color will be overpowering
and unrealistic.
color from the image entirely. If the saturation is too high, that color will be overpowering
and unrealistic.
• Hue: This slidebar adjusts the red/green color hue for true color reproduction of video
signals. For best results, adjust the hue while displaying an external color bar test pattern
(Figure 4-7).
(Figure 4-7).
When you have finished customizing the color space, select Store Setting and press ENTER.
ISF Enable: Use ISF Enable to control the display of the ISF logo on the Vision 10/12 splash
screen upon power-up; see Figure 4-11.
screen upon power-up; see Figure 4-11.
Figure 4-11. ISF-Enabled Vision 10/12 Splash Screen
ICC Adjust
Color Type
NTSC
Intensity
0
Saturation
0
Hue
0
Store Setting
R
G
B
C
Y
M
&$/,%5$7(')25