Vidikron Model 85 Manual Do Utilizador

• Vidikron/ISF Logo Splash Screen Timers: When you turn on the Vision 85, it projects a 

welcome screen with the Vidikron logo followed by one with the ISF logo. Select Splash 
Timer from the Splash Configure menu to set the amount of time that these two images 
appear. The range is from 2 to 60 seconds, in one-second increments. 

Use the up or down cursor button to select a timer value to adjust. Use the right or left 
cursor button to change the timer value. Press MENU when you have finished configuring 
both timers.

OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the 
size and position of the OSD controls.

Use the Service menu to access advanced projector configuration settings. This menu 
should be used by ISF-certified technicians only.

Test Video: Select Test Video from the Service Menu to access the internal test patterns on 
the Vision 85. Four patterns are available, consisting of white/gray or colored bars. 

Press MENU to exit test pattern mode. 

 

 

 

 

 

Input Names: You can give each VHD Controller input a descriptive name. For example, you 
may want to change the default input name to the type of source component connected to 
it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can 
be up to 12 characters long; the others can be up to eight characters long. 

To edit an input name, select Input Names from the Service menu. Press 

 or 

 to select an 

input and press ENTER. Use the 

 or 

 buttons to change a character; press 

 or 

 to 

select a character to change. When you have finished editing the input name, press MENU. 

To restore the default input name, press 

 repeatedly to highlight that input name in the 

“Restore” column. Then, press ENTER. 

To save input names so that they can be restored after a System Reset (described on 
page 62), press 

 repeatedly to highlight “Save.” Then, press ENTER. 

 button takes you from top to bottom in the left column, then from