Runco LS-1 Manual Do Utilizador
28
Runco LS-1 Installation/Operation Manual
PRE
L
IMINAR
Y
Adjusting the Projection
Angle
If the screen is significantly higher or lower than the projector, you can also tilt the
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
mount.
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
mount.
For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the
projection angle.
projection angle.
The projector can be rotated (side-to-side) up to 360 degrees and mounted without it
affecting performance. However, to ensure optimal performance of the lamp, limit the
front-to-back tilt of the projector to ±20 degrees; see Figure 3-7.
affecting performance. However, to ensure optimal performance of the lamp, limit the
front-to-back tilt of the projector to ±20 degrees; see Figure 3-7.
Figure 3-7. Mounting Angle Ranges (Side-to-Side and Front-to-Back)
If you do this, you may need to vertically shift the image to compensate. For detailed
instructions, refer to Lens Adjustments on page 38.
instructions, refer to Lens Adjustments on page 38.
➤
± 360º
± 20º