Vertex Standard FT-60R Manual Do Utilizador
FT-60R O
PERATING
M
ANUAL
30
L
ABELING
M
EMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a la-
bel.
bel.
2.
Press the [F/W] key, then press the [0(
)SET] key to enter the
Set mode.
3.
Rotate the DIAL knob to select Set Mode Item 28: NM WRT.
4.
Press the [F/W] key momentarily to display the previously stored
label (if any).
label (if any).
5.
Press the [F/W] key again to clear any previous label.
6.
Rotate the DIAL knob to select the first digit of the desired la-
bel.
bel.
7.
Press the [F/W] key to move to the next character.
8.
If you make a mistake, press the [
(MHz)] key to back-space the cursor, then re-enter
the correct letter, number, or symbol.
9.
Repeat steps 5 through 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of six characters may be used in the creation of a label.
desired label. A total of six characters may be used in the creation of a label.
10. When you have programmed a label which is under 6 characters, press and hold in the
[F/W] key for one second to confirm the label (if the label is
exactly 6 characters in length, you do not need to press and hold
in [F/W]).
exactly 6 characters in length, you do not need to press and hold
in [F/W]).
11. When you have completed the creation of the label, press the PTT key to save the
label and exit.
To display the alpha-numeric “Tag” (label):
1.
Set the FT-60R to the “MR” (Memory Recall) mode, and recall
the memory channel on which you wish to display its label.
the memory channel on which you wish to display its label.
2.
Press the [F/W] key, then press the [0(
)SET] key to enter the
Set mode.
3.
Rotate the DIAL knob to select the Set Mode Item labeled 27:
NAME
NAME
.
4.
Press the [F/W] key momentarily to enable adjustment of this
Item’s setting.
Item’s setting.
5.
Rotate the DIAL knob to set this Set Mode Item to “ALPHA”
(thus enabling the alpha-numeric display).
(thus enabling the alpha-numeric display).
6.
Press the PTT key to save the new setting and activate the al-
pha-numeric Tag.
pha-numeric Tag.
M
EMORY
M
ODE