Vertex Standard VX-2R Manual Do Utilizador

The VX-2R consists of a MAIN-UNIT, a FILTER-UNIT, a

SW-UNIT, and a VCO-UNIT. The MAIN-UNIT contains

the receiver front end, IF circuit, PLL circuit, the CPU,

audio ICs, and the power circuitry for the LCD. The FIL-

TER-UNIT contains the CTCSS/DCS Encoder/Decoder cir-

cuit. The SW-UNIT contains the TX power amplifier cir-

cuit and power switching circuits. The VCO-UNIT con-

tains the transmit/receive local signal oscillator and trans-

mit modulator circuit.

The VX-2R includes four receiver front ends, each opti-

mized for a particular frequency range and mode combi-

nation.

(1) Triplexer
Signals between 0.5 and 540 MHz received at the antenna

terminal pass through a first low-pass filter composed of

L1053, L1056, C1300, and C1302.
Received 430-MHz signals, after passing through a low-

pass filter, are fed to the UHF T/R switch circuit composed

of diode switch D1057 (RLS135) and D1059 (1SV307).
Received 145-MHz signals, after passing through a low-

pass filter, are fed to the VHF T/R switch circuit composed

of diode switch D1058 (RLS135) and D1060 (1SV307).

(2) 145-MHz Band and 76-300MHz Reception
Received signals between 140 and 150 MHz pass through

the Triplexer circuit, a low-pass filter/high-pass filter cir-

cuit, VHF T/R switch circuit, and protector diode D1002

(1SS362) before additional filtering by a band-pass filter

prior to application to RF amplifier Q1005 (2SC5555). The

amplified RF signal is passed through a band-pass filter

to first mixer Q1014 (2SC5555). Meanwhile, the first lo-

cal signal for the VHF band from the VCO-UNIT is am-

plified by Q1025 (2SC5374) and applied through diode

T/R switch D1041 (DAN222M) to mixer Q1014 (2SC5555)

as the first local signal.
The 47.25-MHz intermediate frequency product of the

mixer is delivered to the IF circuit.
The TUNE voltage from the CPU is amplified by DC am-

plifier Q1016 (NJU7007) and applied to varactors D1020

(1SV325), D1021 (1SV325), D1022 (HVC369), D1023

(1SV325), D1024 (1SV325), D1025 (HVC369), D1034

(1SV325), and D1035 (1SV325) in the variable frequency

band-pass filters. By changing the electrostatic capacitance

of the varactors, optimum filter characteristics are pro-

vided for each specific operating frequency.

(3) 435-MHz Band and 300-540MHz Reception
Received signals between 430 and 450 MHz pass through

the Triplexer circuit, a low-pass filter/high-pass filter cir-

cuit, UHF T/R switch circuit, and protector diode D1001

(1SS362) before additional filtering by a band-pass filter

prior to application to RF amplifier Q1004 (2SC5555). The

amplified RF signal is passed through a band-pass filter,

RF amplifier Q1008 (2SC5555), and another band-pass

filter to first mixer Q1013 (2SC5555). Meanwhile, the first

local signal for the UHF band from the VCO-UNIT is

amplified by Q1024 (2SC5374) and applied through di-

ode T/R switch D1040 (HN2D01FU) to mixer Q1013

(2SC5555) as the first local signal.
The 47.25-MHz intermediate frequency product of the

mixer is delivered to the IF circuit.
The TUNE voltage from the CPU is amplified by DC am-

plifier Q1016 (NJU7007) and applied to varactors D1018,

D1019, D1032, and D1033 (all HVC358) in the variable

frequency band-pass filters. By changing the electrostatic

capacitance of the varactors, optimum filter characteris-

tics are provided for each specific operating frequency.

(4) 0.5-76 MHz Reception
Received signals between 0.5 and 76 MHz pass through

the Triplexer circuit, a low-pass filter circuit, T/R switch

circuit, and protector diode D1003 (1SV307) before addi-

tional filtering by a band-pass filter prior to application to

RF amplifier Q1009 (2SC5555). The amplified RF signal

is passed through the band-pass filter to first mixer Q1015

(2SC5555). Meanwhile, the first local signal for the BC/

SW band from the VCO-UNIT is amplified by Q1026

(2SC5374) and fed to mixer Q1015 (2SC5555) as the first

local signal.
The 47.25-MHz intermediate frequency product of the

mixer is delivered to the IF circuit.
The TUNE voltage from the CPU is amplified by DC am-

plifier Q1016 (NJU7007) and applied to varactors D1026

(HVR100) in the variable frequency band-pass filters. By

changing the electrostatic capacitance of the varactors, op-

timum filter characteristics are provided for each specific

operating frequency.

(5) 540 - 999 MHz Reception
Received signals between 540 and 999 MHz pass through

a high-pass filter circuit and T/R switch D1005 (1SV271)

prior to application to RF amplifier Q1002 (2SC5277). The

amplified RF signal is passed through a band-pass filter

to first mixer Q1012 (2SC5277). Meanwhile, the first lo-

cal signal for the UHF band from the VCO-UNIT is am-

plified by Q1024 (2SC5374) and applied through diode

T/R switch D1040 (HN2D01FU) to mixer Q1012 (2SC5277)

as the first local signal.
The 47.25-MHz intermediate frequency product of the

mixer is delivered to the IF circuit.
The TUNE voltage from the CPU on the CNTL-UNIT is

amplified by DC amplifier Q1016 (NJU7007) and applied