Agilent Technologies E2625A Manual Do Utilizador
1- 6
Introduction to Option 100 and E2625A Telecommunications Mask Template Kit
Overview of the Mask Test Setup dialog box
Overview of the Mask Test Setup dialog box
You will use the Mask Test Setup dialog box shown here to load and use
masks with the Infiniium Oscilloscope. Standard masks are shown in
Chapter 3. How to load and use a mask is described in Chapter 2.
masks with the Infiniium Oscilloscope. Standard masks are shown in
Chapter 3. How to load and use a mask is described in Chapter 2.
Checkmark to
enable the
Mask Test.
enable the
Mask Test.
Mask Test Setup
Dialog Box
Dialog Box
Click to load a
Mask.
Mask.
Click to align or
clear a Mask.
clear a Mask.
See the Infiniium help system to
use Scaling and Automask.
use Scaling and Automask.
A Mask Test tab
will appear
when the
Mask Test
is enabled.
will appear
when the
Mask Test
is enabled.
Click to start
and stop the
Mask Test.
and stop the
Mask Test.
Conditionally run
the Mask Test
and stop on the
first failure.
the Mask Test
and stop on the
first failure.
Check options to invert a
mask, use the file setup
when aligning a mask, or
enable averaging to
reduce noise.
mask, use the file setup
when aligning a mask, or
enable averaging to
reduce noise.