Nortel Networks PO937240 02 Manual Do Utilizador
Chapter 5 Handling calls
59
Telephone Features Programming Guide
Each telephone in your system can handle one camped call at a time.
Call Park
When you park a call, the system assigns one of 25 codes for the retrieval of the call. These codes
include the Call Park prefix, which can be any digit from 1 to 9, and a two-digit call number
between 01 and 25. For example, if the Call Park prefix is 1, the first parked call is assigned Call
Park retrieval code 101.
include the Call Park prefix, which can be any digit from 1 to 9, and a two-digit call number
between 01 and 25. For example, if the Call Park prefix is 1, the first parked call is assigned Call
Park retrieval code 101.
The system assigns Call Park codes in sequence, from the lowest to the highest, until all the codes
are used. A round-robin method means the use of different of codes ensures a call reaches the right
person, especially when more than one incoming call is parked.
are used. A round-robin method means the use of different of codes ensures a call reaches the right
person, especially when more than one incoming call is parked.
The highest call number (the Call Park prefix followed by 25) is used only by analog telephones or
devices connected to the system using an ATA2 or an ASM. Analog telephones or devices cannot
use the other Call Park codes.
devices connected to the system using an ATA2 or an ASM. Analog telephones or devices cannot
use the other Call Park codes.
The person to whom you redirected a call has Do Not Disturb
active on the telephone. The call has come back to you. Press the
active on the telephone. The call has come back to you. Press the
CALLBCK
button or the line button to reconnect to the call. On the
T7100 telephone, just pick up the handset.
You have tried to camp an internal call. You can camp external
calls only.
calls only.
Dial the number of the internal telephone to which you want to
camp the call.
camp the call.
The telephone to which you camped a call did not answer the
call. The call has come back to you. Press
call. The call has come back to you. Press
CALLBCK
or the line
button to reconnect to the call. On the T7100 telephone, just
pick up the handset.
pick up the handset.
A call you camped has come back to you, but the caller hung up
before you can reconnect.
before you can reconnect.
The telephone to which you have camped a call is out of service
or is used for programming. The call has come back to you.
Press
or is used for programming. The call has come back to you.
Press
CALLBCK
or the line button to reconnect to the call. On the
T7100 telephone, just pick up the handset.
The line that the camped call is on is in use or that line does not
appear at your telephone. Release the line or release an internal
line.
appear at your telephone. Release the line or release an internal
line.
For other displays, see
.
221 DND
CALLBCK
CALLBCK
Camp denied
Camp to:
CANCL
CANCL
Camped: 221
CALLBCK
CALLBCK
Line061 hung up
Not in service
CALLBCK
CALLBCK
Release a call