Nortel Networks PO937240 02 Manual Do Utilizador
Chapter 6 Forward your calls
67
Telephone Features Programming Guide
•
Press
≥ or
OK
if the line you have selected as the outgoing line is a private network line
that does not require you to dial digits.
4
Select the lines to redirect.
If you use
ALL
to redirect all your lines, ensure that you wait until all the lines on your telephone
light up before pressing
≥ or
OK
. If you press
≥ or
OK
before all the lines light up, those lines
not lit do not redirect.
You can continue to use the line selected for redirecting calls on other lines when the line is not
busy on a redirected call. To avoid redirection failing because the selected line is in use, select a
line pool with several lines in it. The system does not check that the number you give for line
redirection is a valid one. If you redirect to an invalid number, redirection fails. To avoid a
redirections failure, use an autodial button to enter the redirection number. You must program
autodial buttons used for line redirection to use a specific line.
busy on a redirected call. To avoid redirection failing because the selected line is in use, select a
line pool with several lines in it. The system does not check that the number you give for line
redirection is a valid one. If you redirect to an invalid number, redirection fails. To avoid a
redirections failure, use an autodial button to enter the redirection number. You must program
autodial buttons used for line redirection to use a specific line.
Cancel Line Redirection
To cancel Line Redirection:
1
Press
≤£°›.
2
Select the lines you no longer want to redirect.
Turn the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when you redirect a call on one of
its lines.
its lines.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
The following displays appear when redirecting lines:
Note:
If a telephone has redirect ring enabled, it rings briefly for redirected calls
on one of its lines when another telephone has set up the line redirection.
You selected the intercom button as the facility on which to
place the call. Enter a line pool code or a destination code.
place the call. Enter a line pool code or a destination code.
Press
• or
ADD
to begin redirection. Press
£ or
REMOVE
to
cancel a previous redirection.
You have one external line on your telephone, but you need a
second line to perform line redirection. Redirect your external
line using a line pool as the outgoing line.
second line to perform line redirection. Redirect your external
line using a line pool as the outgoing line.
Intercom
Line Redirection
QUIT
QUIT
ADD
REMOVE
No line to use