Справочник Пользователя для VIZIO 470M
VIZIO SV420M & SV470M User Manual
44
www.VIZIO.com
Daylight Saving
As for Time Zone, setting the daylight saving time for your area will ensure that
the correct program times are shown after pressing the GUIDE button on the
remote control.
Press the
the correct program times are shown after pressing the GUIDE button on the
remote control.
Press the
"
button to highlight the Daylight Saving selection.
Press the $ or # button to select On or Off.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely. When the MENU button is pressed, press the
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely. When the MENU button is pressed, press the
"
button
to scroll down to SETUP. Press # button to display SETUP page.
Channel Info
Channel Info displays the technical information of the channel including
channel number, frequency, modulation type, status, SNR (signal noise ratio),
and signal strength.
channel number, frequency, modulation type, status, SNR (signal noise ratio),
and signal strength.
DTV / TV Input Setup
Language
When the MENU button is pressed, the On Screen Display (OSD) appears on
the PICTURE adjustment page. Press the
the PICTURE adjustment page. Press the
"
button until to highlight SETUP.
Press the # button. The SETUP page will come up.
Press the
Press the
"
button to highlight the Language selection. The default is English.
Press the $ or # button to select Español or Français.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
PIP (Picture-in-Picture)
Your TV features PIP mode so you can watch two pictures at the same time.
When PIP is turned on, you can display two pictures at one time. One picture is
displayed as the full screen (main screen) and the other picture is displayed in
a small window (sub screen). The sub-screen can be set to small, medium or large. You can swap the
program that is in the main picture with the program in the PIP sub-picture. To swap the main picture
program with the PIP sub-picture program, press SWAP on the remote control. If you press SWAP again,
it will return the program to the main picture.
When PIP is turned on, you can display two pictures at one time. One picture is
displayed as the full screen (main screen) and the other picture is displayed in
a small window (sub screen). The sub-screen can be set to small, medium or large. You can swap the
program that is in the main picture with the program in the PIP sub-picture. To swap the main picture
program with the PIP sub-picture program, press SWAP on the remote control. If you press SWAP again,
it will return the program to the main picture.
Note:
PIP will only be available when the Parental Controls are OFF.
Note:
PIP will only be available through AV/TV inputs.
Press the
"
button to highlight the PIP (Picture-in-Picture) selection.
Press the # button. A separate menu will appear with the following PIP settings.