Инструкция для Sony HMZT3W

HMZ-T3W   4-471-975-

11(1)

To loosen

To tighten

  Raise the top headband 

and the forehead 

supporter.

The position of the forehead supporter is 
adjustable. 
The lowest position is standard.

  Pull out the straps of 

the top and bottom 

headbands.

Hold down the button on the upper side of 
each adjuster and pull out the strap on the 
right.

  Put the head mounted unit 

on your head.

Lower the bottom headband to the base of 
your head.

  Tighten the headbands 

loosely and adjust the 

position of the head 

mounted unit.

Push the strap into the adjuster on the top 
and bottom headbands to fix the head 
mounted unit.
Carefully adjust the unit left, right, up, and 
down to find the best position for viewing 
the centers of the screens.

  Tighten the headbands 

securely.

  Put on the headphones.

If you normally wear glasses or contact lenses, wear them as usual during 
use (with the exception of reading glasses). Note that watching with bifocals 
may be less than optimal.

2

 Adjust and Wear

For a Comfortable Fit

  Support the unit with your forehead and at two positions  

on the back of your head.

  Do not rest it on your nose.
  Adjust the unit so that the screens are in front of your eyes.
  Place the battery unit in a stable position.

When you wear glasses or need further adjustment
Refer to “Fitting the Head Mounted Unit” of the “Reference Guide.”

Screen

All three “ ” marks 
and the horizontal 
line intersect.

One or more “ ” 
marks and the 
horizontal line do 
not intersect.

  Select a display language 

(first time only).

Press the 

/ button to 

select a language, and then 
press the MENU or 

 button.

  Adjust the lens span.

Slide each lens span adjuster until you can 
see both screens clearly.
After adjustment, press the MENU button or 

 button.

Tips

  If you cannot see the screen clearly after lens span adjustment, 

start over from “2 Adjust and Wear.”

  If adjustment is difficult, try sliding both adjusters to the center 

position before adjustment.

  Check display alignment.

Confirm that all three “ ” marks and the 
horizontal line intersect then press the MENU 
or 

 button.

It is acceptable if the “ ” marks and the 
horizontal line intersect in a position other 
than the center of the screen.

Note

  The “ ” marks and the horizontal line do not intersect if the 

position of the head mounted unit is shifted. Readjust the 
length of the headbands and confirm the position, referring to 
“2 Adjust and Wear” and “

 Adjust the lens span.”

 If even one of the “ ” marks and the horizontal line do not 

intersect, refer to “Confirming Screen Alignment” of the  
“Reference Guide.”

  Follow the instructions 

displayed on the screen.

Refer to the information on the screen for 
operation.

  Operate the playback 

equipment.

The picture appears on the screen of the 
head mounted unit.

Tips

  Adjust the volume using the VOL +/– button on the head 

mounted unit. 

  It is useful to keep the remote control unit for the playback 

equipment at hand.

  Some functions of the playback equipment can be controlled 

from this system. For details refer to “Control for HDMI” in 
“General Setup” of the “Reference Guide.”

3

 Set Up and View

Follow the instructions 
displayed on the 
screen for operations.

Resolving lack of audio, video, or 3D playback

1.  Turn on the processor unit and the head mounted unit.
2. Turn the playback equipment off then back on. 

If the playback equipment is a PlayStation®3, turn it off then 

hold down the power button on the PlayStation®3 for at least 5 

seconds (until you hear another beep) to restart it.

“PlayStation” is a registered trademark of Sony Computer Entertainment Inc.

Eye

Screen