Справочник Пользователя для Sony DSLR-A700

Скачать
Страница из 19
4
Prepare the battery pack
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source 
(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the 
battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall 
socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and 
remove the battery pack from the battery charger.
• Time required to charge a fully depleted battery pack (supplied) at a temperature of 25°C (77°F). Charging 
may take longer under certain circumstances or conditions.
Full charge
Normal charge
Approx. 235 min.
Approx. 175 min.
1
 Insert the battery pack.
Push the battery pack until it clicks.
2
Connect the power cord (mains lead).
Power cord (mains lead)
3
To wall 
outlet (wall 
socket)
Battery 
charger
CHARGE lamp
Light on: Charging
Light off: Completed (Normal Charge)
If you continue charging the battery pack for approximately one more hour, until it is fully 
charged (Full Charge), the battery life will be slightly longer.
4
Insert the charged battery pack.
While sliding the battery 
cover open lever, open 
the battery cover.
Firmly insert the battery pack all 
the way while pressing the lock 
lever with the tip of the battery.
Close the cover.
Lock lever