Справочник Пользователя для Sony DSC-P20
Ad
di
di
tiona
l inf
o
rm
atio
n
71
Troubleshooting
If you experience trouble with your camera, first check the following items. Should
your camera still not operate properly after you have made these checks, press the
reset button located on the bottom. (If you press the reset button, the date and time
setting is cleared.) Should your camera still not operate properly, consult your Sony
dealer or local authorized Sony service facility. If code displays (C:
your camera still not operate properly after you have made these checks, press the
reset button located on the bottom. (If you press the reset button, the date and time
setting is cleared.) Should your camera still not operate properly, consult your Sony
dealer or local authorized Sony service facility. If code displays (C:
ss
ss
ss
ss:ss
ss
ss
ss)
appear on the LCD screen, the self-diagnosis display function is working
(page 79).
(page 79).
Symptom
Cause and/or Solution
The power is not turned on
if you press the POWER
button.
if you press the POWER
button.
t Press and hold down the POWER button for
approximately one second.
Your camera does not
work.
work.
•
The battery level is low (the
E indicator appears
on the LCD screen).
t Replace the alkaline batteries or charge the
t Replace the alkaline batteries or charge the
•
The AC power adaptor is not connected securely.
t Connect it firmly to the DC IN jack of your
t Connect it firmly to the DC IN jack of your
•
The built-in microcomputer is not working
properly.
t Disconnect and then reconnect all power
properly.
t Disconnect and then reconnect all power
sources after one minute. Then turn the power
on and check that the camera works properly.
Press the reset button located on the bottom
using a sharp-pointed object.
on and check that the camera works properly.
Press the reset button located on the bottom
using a sharp-pointed object.
Your camera cannot
record images.
record images.
•
The lens cover is closed.
t Open the lens cover.
t Open the lens cover.
•
You cannot record images while charging the flash.
•
The mode dial is set to
or SET UP.
t Set it to
,
or
•
•
The write-protect tab on the “Memory Stick” is set
to LOCK.
t Set it to the recording position.
to LOCK.
t Set it to the recording position.