Справочник Пользователя для Insignia NS-CR2031
8
Insignia SC/MMC/MS Memory Card Reader NS-CR2031
www.insigniaproducts.com
If memory cards appear in My Computer/Computer (Windows operating
systems) or on the desktop (Mac operating systems) but errors occur
when writing or reading, check the following:
•
systems) or on the desktop (Mac operating systems) but errors occur
when writing or reading, check the following:
•
Make sure that the memory card is fully inserted into the slot.
•
Try a different memory card of the same type in the same slot. If the
different memory card works, the original memory card should be
replaced.
different memory card works, the original memory card should be
replaced.
•
Some cards have a read/write security switch. Make sure that the
security switch is set to Write Enabled.
security switch is set to Write Enabled.
•
Make sure that the amount of data you attempted to store has not
exceeded the capacity of the card.
exceeded the capacity of the card.
•
Inspect the ends of the memory cards for dirt or material closing a
hole. Clean the contacts with a lint-free cloth and small amounts of
isopropyl alcohol.
hole. Clean the contacts with a lint-free cloth and small amounts of
isopropyl alcohol.
•
If errors persist, replace the memory card.
•
Some memory cards are not compatible with XP such as SDXC. Refer
to your card manufacturer to see if your card is compatible with your
OS.
to your card manufacturer to see if your card is compatible with your
OS.
If no memory card icon appears when a card is inserted into the reader
(MAC OS X), check the following:
•
(MAC OS X), check the following:
•
The card may have been formatted in Windows FAT 32 format. Using a
PC or digital device, reformat the card using OS X-compatible FAT or
FAT16 format.
PC or digital device, reformat the card using OS X-compatible FAT or
FAT16 format.
If you get an error message during automatic driver installation (Windows
operating systems), check the following:
•
operating systems), check the following:
•
Make sure that your card reader is connected to your computer.
•
Make sure that only one card reader is connected to your computer. If
other card readers are connected, unplug them before connecting
this card reader.
other card readers are connected, unplug them before connecting
this card reader.
Specifications
Supported file
systems
systems
FAT/FAT32, NTFS
Three memory slots
SD slot
MS slot
microSD slot
MS slot
microSD slot
Indicators
Card detected: Blue LED on
Data access: Blue LED flashing
Data access: Blue LED flashing
Supported cards
Secure Digital (SD, SDHC, SDXC, Mini SD*), MultiMediaCard (MMC, MMC plus,
RS-MMC*), and Memory Stick (MS, MS Pro, MS Duo, MS Pro Duo, MS Pro HG,
M2*) cards, microSDXC, microSDHC, microSD.
Notes:
1.Cards marked with * require an adapter.
2.Supports SDXC and microSDXC, but the read and write speed is the same as
SDHC and microSDHC.
3.Supports MS Pro HG, but the read and write speed is the same as MS Pro Duo.
RS-MMC*), and Memory Stick (MS, MS Pro, MS Duo, MS Pro Duo, MS Pro HG,
M2*) cards, microSDXC, microSDHC, microSD.
Notes:
1.Cards marked with * require an adapter.
2.Supports SDXC and microSDXC, but the read and write speed is the same as
SDHC and microSDHC.
3.Supports MS Pro HG, but the read and write speed is the same as MS Pro Duo.
NS-CR2031_14-0030_MAN_V1_ENG.fm Page 8 Thursday, May 22, 2014 1:49 PM