Руководство Пользователя для Sony 370PK2
Chapter 2 Fitting and Connections
47
Chapter 2 Fitting and Connections
3
Fit the attachment plate on the
rear side of the CA-WR855 to
the V-groove on the battery
attachment interface, and then
slide the CA-WR855 down
until it connects to the WRR
connector.
rear side of the CA-WR855 to
the V-groove on the battery
attachment interface, and then
slide the CA-WR855 down
until it connects to the WRR
connector.
4
Set one of the AUDIO IN (CH-
1/CH-2) switches to
WIRELESS.
1/CH-2) switches to
WIRELESS.
CA-WR855
To connect a WRR-810A/860A
Attach the WRR tuner fitting (not supplied) (Part No.
A-8278-057-A) to the rear of the camcorder as shown
in the following figure.
Attach the WRR tuner fitting (not supplied) (Part No.
A-8278-057-A) to the rear of the camcorder as shown
in the following figure.
1
Pass a screwdriver through the holes and tighten
the screws .
the screws .
2
Loosen the adjustment screws.
3
Adjust the metal fitting position for a battery pack
to be attached, and tighten the adjustment screws
to fix its position.
to be attached, and tighten the adjustment screws
to fix its position.
4
Attach the holder kit (two fittings and four screws,
supplied with the tuner) to the WRR tuner fitting
(one for the upper position and the other for the
lower position).
supplied with the tuner) to the WRR tuner fitting
(one for the upper position and the other for the
lower position).
5
Mount the tuner on the WRR tuner fitting.
For details about the WRR tuner fitting (Part No. A-8278-
057-A), contact your Sony dealer.
057-A), contact your Sony dealer.
WRR-810A/860A
5
4
1
4
2,3