Справочник Пользователя для Sony PDW-F330L
144
Adjustments and Settings from Menus
C
ha
pte
r 5
M
en
u D
is
pla
ys
a
nd
D
eta
ile
d S
ett
in
gs
Setting the aspect ratio for SD playback in
HD mode
When outputting SD video down-converted from HD
video, you can switch the aspect ratio.
video, you can switch the aspect ratio.
(How to select an item in the menu screen: Turn the
MENU knob to move the
MENU knob to move the
b mark to the desired item.)
1
Display the OUTPUT page of the OPERATION
menu, and press the MENU knob.
menu, and press the MENU knob.
2
Select HD
tSD(PLAY BACK), and press the MENU
knob.
3
Turn the MENU knob to select the desired aspect ratio
(16:9/4:3), and press the MENU knob.
(16:9/4:3), and press the MENU knob.
The HD analog composite output from the PDW-F330 and
the HDSDI output from the PDW-F350 are always of the
aspect ratio of 16:9.
the HDSDI output from the PDW-F350 are always of the
aspect ratio of 16:9.
To display the aspect ratio of 16:9 on the
viewfinder screen
When the recording format is DVCAM and the aspect ratio
is 16:9, you can display the indication “16:9” on the
viewfinder screen by setting DISP 16:9 on the VF DISP 1
page of the OPERATION menu to ON.
is 16:9, you can display the indication “16:9” on the
viewfinder screen by setting DISP 16:9 on the VF DISP 1
page of the OPERATION menu to ON.
For details, see “Selecting the Display Items” on page
136.
136.
About the CCD Scan Mode
This unit allows you to record in progressive scan mode as
well as in interlace scan mode. You can select the scan
mode from the following modes using the FORMAT page
of the OPERATION menu.
• 60i (interlace scan) mode
• 30P (progressive scan) mode
• 23.98P mode
well as in interlace scan mode. You can select the scan
mode from the following modes using the FORMAT page
of the OPERATION menu.
• 60i (interlace scan) mode
• 30P (progressive scan) mode
• 23.98P mode
Pulldown method for DVCAM format recording in 23.98P mode
DVCAM video signals recorded in 23.98P mode are 2-3
pulled down, and recorded on a disc as 60i signals.
pulled down, and recorded on a disc as 60i signals.
.
Note
DF/NDF
Purpose
Notes
DF
Obtain an effect similar
to that obtained by
23.98P shooting while
maintaining interlace
scan mode.
–
NDF
Re-convert to 23.98P
with nonlinear editing
software (NLE).
(Select according to
your NLE.)
• You can start recording at frame 0 or frame 5 of the timecode. Therefore, when setting
the timecode or recording in backspace editing mode, the value of the least significant
digit is limited to 0 or 5.
digit is limited to 0 or 5.
• There will be noise on the recorded image if you change the operating mode for the
internal timecode generator using the F-RUN/SET/R-RUN switch on the side control
panel while recording.
panel while recording.
• The video and audio signal and timecode output via i.LINK may not be consecutive
when recording starts.
Notes on 2-3 pulldown
• When the PRESET/REGEN/CLOCK switch on the side control panel is set to CLOCK,
this unit operates in DF mode. The synchronization of the timecode and the pulled-
down picture is disabled.
down picture is disabled.
• When drop-frame timecode is input via the TC IN connector, this unit operates in DF
mode and synchronization of the pulled-down picture and the timecode is disabled.
This setting will continue in effect until the timecode setting (F-RUN/R-RUN or DF/NDF)
is changed.
This setting will continue in effect until the timecode setting (F-RUN/R-RUN or DF/NDF)
is changed.