Справочник Пользователя для Sony PDW-F330L
51
Connecting
C
ha
pte
r 2
P
re
pa
ra
tio
ns
Connecting
Some of the peripheral devices and related products
referred to in this section may be no longer in production.
When selecting the devices, consult your Sony dealer.
referred to in this section may be no longer in production.
When selecting the devices, consult your Sony dealer.
Connecting an External Video
Monitor
Monitor
When using a Sony liquid crystal display monitor, make
the connections as follows.
the connections as follows.
a
To check an analog HD/SD (NTSC/PAL) signal
Connect the VIDEO OUT Y/P
B
/P
R
connectors of this unit
and the RGB/COMPONENT input connectors of the
LMD-9030 liquid crystal display monitor with a
component video cable (not supplied).
LMD-9030 liquid crystal display monitor with a
component video cable (not supplied).
The signal output from the VIDEO OUT Y/P
B
/P
R
connectors can be switched with “COMPONENT OUT”
on the OUTPUT page of the OPERATION menu. For more
details, see page 114.
on the OUTPUT page of the OPERATION menu. For more
details, see page 114.
It is not possible to add text information or markers to the
HD output.
HD output.
b
To check an SD (NTSC/PAL) signal
Connect the VIDEO OUT connector of this unit and the
LINE A or LINE B input connector of the LMD-9030
LINE A or LINE B input connector of the LMD-9030
liquid crystal display monitor with a 75
" coaxial cable
(not supplied).
a
To check an HDSDI signal
Connect the HDSDI OUT connector of this unit and the
SDI input connector of the LMD-9050 liquid crystal
display monitor with a 75
SDI input connector of the LMD-9050 liquid crystal
display monitor with a 75
" coaxial cable (not supplied).
Note that regardless of the recording format (MPEG HD/
DVCAM), during recording or while recording is stopped
an HD signal is output.
DVCAM), during recording or while recording is stopped
an HD signal is output.
• When playing back video recorded in SD format
(DVCAM format), no signal is output from the HDSDI
OUT connector.
OUT connector.
• Text information and markers cannot be superimposed
on the HDSDI output.
b
To check an SD (NTSC/PAL) signal
Connect the VIDEO OUT connector of this unit and the
LINE A or LINE B input connector of the LMD-9050
liquid crystal display monitor with a 75
LINE A or LINE B input connector of the LMD-9050
liquid crystal display monitor with a 75
" coaxial cable
(not supplied).
The items displayed on a monitor are same as the ones on
the viewfinder screen. For details, see “Status Display on
the Viewfinder Screen” on page 31.
the viewfinder screen. For details, see “Status Display on
the Viewfinder Screen” on page 31.
Using an i.LINK Connection
Using the (i.LINK) DV OUT S400 connector, you can
connect external equipment to the camcorder.
Video recorded in the MPEG HD format is down-
converted to the DVCAM format and output from the
(i.LINK) DV OUT S400 connector.
connect external equipment to the camcorder.
Video recorded in the MPEG HD format is down-
converted to the DVCAM format and output from the
(i.LINK) DV OUT S400 connector.
Note
F330
Note
2
75" coaxial
cable
PDW-F330
LMD-9030 liquid crystal
display monitor
to VIDEO OUT Y/P
B
/P
R
connector
to LINE A/B input connector
to VIDEO OUT
connector
to RGB/COMPONENT
input connector
1
Component video cable
F350
Notes
1
75" coaxial
cable
PDW-F350
LMD-9050
liquid crystal display monitor
to VIDEO OUT connector
to SDI input connector
to HDSDI OUT
connector
to LINE A/B input
connector
2
75" coaxial cable