Справочник Пользователя для Sony PDW-F335KL

49

Handling Discs

  Chapt

er

 3

  Rec

o

rd

ing and

 P

la

y

bac

k

You can also write protect individual clips. For details, see 
“Locking (Write-Protecting) Clips” (page 81).

Proceed as follows.

Turn on the POWER switch.

If there is condensation inside the VDR section, the 
message “HUMID” appears in the status display on 
the LCD monitor. If this happens, wait until the 
indicator goes off before going on to step 2.

Press the EJECT button.

This opens the lid of the disc compartment.

Insert the disc in the V direction, and close the disc 
compartment lid manually.

The disc is loaded.

To insert the disc correctly, make sure that the 
camcorder is in the upright position (the grip upside, 
the bottom downside).

With the power supply on, press the EJECT button to open 
the disc compartment lid and eject the disc, then remove 
the disc. If you are not going to insert another disc, close 
the disc compartment lid.

An unused disc requires no formatting operation. The disc 
is automatically formatted so that it is ready to use when 
loaded into this unit.

To format a recorded disc, load the disc into the unit then 
do as follows.

When a recorded disc is formatted, all the data on the disc 
is erased. (Locked clips (see page 81) are also erased.)

Lower surface of the disc

Write Inhibit tab

Slide in the direction 
of the arrow

Recording enabled

Recording disabled

POWER switch

HUMID indicator

EJECT button

Lid of the disc 
compartment

Insert the disc.

V indication on the outside

Push and close the lid.