Справочник Пользователя для Sony PDW-530P
154
9-1 Power Supply
Chapter
9
Setting Up the
Camcorder
9-1 Power Supply
The following power supplies can be used with the
camcorder.
• BP-GL65/GL95/L60S Lithium-ion Battery Pack
• AC power using the AC-550/550CE or AC-DN10 AC
camcorder.
• BP-GL65/GL95/L60S Lithium-ion Battery Pack
• AC power using the AC-550/550CE or AC-DN10 AC
adaptor
9-1-1 Using a Battery Pack
When a BP-GL95 Battery Pack is used, the camcorder will
operate continuously for about 120 minutes. Before use,
charge the battery pack with a BC-M150 Battery Charger.
It takes about 145 minutes to charge one BP-GL95.
operate continuously for about 120 minutes. Before use,
charge the battery pack with a BC-M150 Battery Charger.
It takes about 145 minutes to charge one BP-GL95.
For details, refer to the battery charger operation manual.
A warm battery pack may not be able to be fully recharged.
Attaching the battery pack
1
Press the battery pack against the back of the
camcorder, aligning the line on the side of the battery
pack with the matching line on the camcorder.
camcorder, aligning the line on the side of the battery
pack with the matching line on the camcorder.
2
Slide the battery pack down until its “LOCK” arrow
points at the matching line on the camcorder.
points at the matching line on the camcorder.
Detaching the battery pack
Detaching the battery pack
Note
During recording or playback (while the ACCESS
indicator is lit), be careful never to remove the battery
pack.
indicator is lit), be careful never to remove the battery
pack.
Note on using the battery pack
Back of camcorder
BP-GL65/
GL95/L60S/
L80S
GL95/L60S/
L80S
Align these
lines.
lines.
“LOCK”
arrow
arrow
Matching line on
the camcorder
the camcorder
Holding the
button in, pull
the battery
pack up.
button in, pull
the battery
pack up.
ACCESS
indicator
indicator