Справочник Пользователя для Sony PDW-530P

Ch
apt

er 10

   

Ma

int
ena

nc
e

173

10-2 Maintenance

Use a dust blower to clean the CRT screen and mirror 
inside the viewfinder barrel.
Clean the lens and protecting filter with a commercially 
available lens cleaner.

Never use organic solvents such as thinners.

Detach the eyepiece from the viewfinder barrel.

Remove the eyecup from the eyecup holder.

Remove the protecting filter, together with the packing 
ring, from inside the eyecup holder.

Detach the protecting filter from the packing ring.

Depending on the temperature and humidity, the 
protecting filter may mist because of vapor or your breath.  
To ensure that the viewfinder is always clear, replace the 
protecting filter with a fog-proof filter (Part No. 1-547-
341-11, not supplied).

Replace the protecting filter on the packing ring with the 
fog-proof filter.

Be sure to correctly assemble the fog-proof filter, the 
packing ring, and the eyecup so that the reassembled 
eyepiece is waterproof.

When cleaning the fog-proof filter, wipe it very gently 
with a soft cloth to avoid damaging the anti-fogging 
coating.

The battery terminal of this unit (the connector for battery 
packs and AC adaptors) is a consumable part.
The unit may not operate properly if the pins of the battery 
terminal are bent or deformed by shock or vibrations, or if 
they become corroded due to prolonged outdoor use.
If you notice bending, deformation, or surface corrosion, 
contact your dealer or a Sony service representative as 
soon as possible to have the battery terminal replaced.
Periodic inspections are recommended to keep the unit 
working properly and to prolong its usable lifetime. 
Contact your dealer or a Sony service representative for 
more information about inspections.

Viewfinder 
barrel

Eyecup 
holder

Protecting 
filter

Packing 
ring

Eyecup