Справочник Пользователя для Sony XC-555
20
RS-232C Command List
Functions Available with
Memory Load/Save
Memory Load/Save
Category
Data
Initial values
Gain
AGC ON/OFF
ON
AGC Max Gain
18dB
Step Gain
0dB
Shutter speed Shutter OFF/CCD Iris/
OFF
Variable
Shutter speed
NTSC:1/60 PAL:1/50
CCD Iris Max Speed
1/4000
Exposure
Exposure Compensation
80h : Normal Status
AE speed
normal
White Balance WB mode AWB/ATW/
3200K
manual/3200K/5600K
ATW speed
normal
Manual R-gain
80h : Normal Status
Manual B-gain
80h : Normal Status
AWB R-gain
1)
–
AWB B-gain
1)
–
Video Process Pedestal
80h : Normal Status
Sharpness
80h : Normal Status
Gamma ON/OFF
ON
Nega ON/OFF
OFF
Output VBS/YC
VBS
VS H-phase
80h : Normal Status
HD/VD H-phase
80h : Normal Status
1)
AWB R,B-gain retains the results of the last One
Push AWB operation. If “Memory Load” is carried
out when WB mode is set to AWB, the AWB R, B-
gain results held in memory are activated.
Push AWB operation. If “Memory Load” is carried
out when WB mode is set to AWB, the AWB R, B-
gain results held in memory are activated.
The Memory Bank to be
Activated When Power is Turned
on
Activated When Power is Turned
on
When the RS-232C switches are set to
OFF
OFF
The “Factory” settings are activated. The AGC,
Shutter, WB, and VBS/YC settings made using the
DIP switches on the side of the camera or made using
R/B adjustment volume are given priority.
Shutter, WB, and VBS/YC settings made using the
DIP switches on the side of the camera or made using
R/B adjustment volume are given priority.
When the RS-232C switches are set to ON
The settings in the Memory Bank (Factory/A/B)
selected in the last Memory Load operation are
activated.
If started using “Factory,” immediately after the power
is turned on, the AGC, Shutter, W.Balance, and VBS/
YC settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are given priority. After that, if the camera enters RS-
232C mode, and “Memory Load Factory” is carried
out, settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are disabled, and the initial values shown in “Functions
Available with Memory Load/Save” on the previous
column are activated.
selected in the last Memory Load operation are
activated.
If started using “Factory,” immediately after the power
is turned on, the AGC, Shutter, W.Balance, and VBS/
YC settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are given priority. After that, if the camera enters RS-
232C mode, and “Memory Load Factory” is carried
out, settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are disabled, and the initial values shown in “Functions
Available with Memory Load/Save” on the previous
column are activated.