Справочник Пользователя для Sony XC-555
5
Overview
Location of Parts and Operation
1
Dip switches for setting functions
This switches are used to adjust white balance and
shutter speed; and to flip AGC (ON/OFF) and output
signals (Y/C/VBS).
For details, see “Mode Setting” on page 6.
shutter speed; and to flip AGC (ON/OFF) and output
signals (Y/C/VBS).
For details, see “Mode Setting” on page 6.
2
R control for manual white balance adjustment
This control is effective when the white balance
switches are set to MAN. Adjust the red color by
turning the control.
switches are set to MAN. Adjust the red color by
turning the control.
3
B control for manual white balance adjustment
This control is effective when the white balance
switches are set to MAN. Adjust the blue color by
turning the control.
switches are set to MAN. Adjust the blue color by
turning the control.
1
2
3
4
5
4
Lens mount (special mount)
5
DC IN/SYNC/VIDEO connector (multi 12-pin)
This connector inputs DC 12V power and outputs the
video signal when the CCXC-12P02N/12P05N/
12P10N/12P25N camera cable is connected.
If the unit is connected to devices that originate a
synchronized signal, the external synchronous signal
(VS, HD/VD) can be used to move the color camera
module.
video signal when the CCXC-12P02N/12P05N/
12P10N/12P25N camera cable is connected.
If the unit is connected to devices that originate a
synchronized signal, the external synchronous signal
(VS, HD/VD) can be used to move the color camera
module.