Справочник Пользователя для Sony HDR-FX1E

Скачать
Страница из 112
Tro
ubl
es
hoo
tin
g
Troubleshooting
83
Troubleshooting
Troubleshooting 
If you run into any problem using your 
camcorder, use the following table to 
troubleshoot the problem. If the problem 
persists, remove the power source and 
contact your Sony dealer. 
If “C:ss:ss” is displayed on the LCD 
screen or the viewfinder, the self-diagnosis 
display function is activated. See page 88 for 
details.
Overall operations
Batteries/Power sources
Symptom
Cause and/or Corrective Actions
The power does not turn on.
• The battery pack is discharged, running low, or not attached to the 
camcorder.
cAttach a charged battery pack to the camcorder (p. 11).
cUse the AC Adaptor to connect to the wall socket (p. 14).
The camcorder does not operate even 
when the power is set to on.
cDisconnect the AC Adaptor from the wall socket or remove the battery 
pack, then reconnect it after about 1 minute. If the functions still do not 
work, press the RESET button using a sharp-pointed object. If you press 
the RESET button, all settings including the clock setting (except the 
Personal Menu and Picture Profile settings) are reset.
A clattering noise is heard when the 
camcorder is handled with the 
POWER switch set to OFF (CHG) or 
VCR.
• This is because some lens functions on the camcorder use a linear 
mechanism. This is not a malfunction.
The supplied Remote Commander 
does not function.
cSet [REMOTE CTRL] on the 
 (OTHERS) menu to [ON] (p. 64).
cInsert batteries into the battery compartment with the + – polarities 
correctly matching the + – marks. If this still does not solve the problem, 
insert new batteries since the batteries are dead (p. 105).
cRemove any obstructions between the Remote Commander and the 
remote sensor.
The camcorder gets warm.
• This is because the power has been turned on for a long time. This is not 
a malfunction.
Symptom
Cause and/or Corrective Actions
The CHG (charge) lamp does not 
light while the battery pack is being 
charged.
cAttach the battery pack to the camcorder correctly. If the lamp still does 
not light up, then it indicates that no power is supplied from the wall 
socket.
• The battery charge is completed (p. 11).
,
continued