Справочник Пользователя для Sony PMW-350K

Скачать
Страница из 171
Viewfinder Screen Display
29
Chapt
er
 1
  
Ov
er
v
ie
w
The viewfinder screen displays not only the video 
picture but also characters and messages 
indicating the camcorder settings and operating 
status, a center marker, a safety zone marker, etc.
When the menu screen is not displayed and the 
DISPLAY switch is set to ON, the items for 
which an ON setting was made with 
OPERATION >Super Impose in the setup menu 
or with related switches are displayed at the top 
and bottom of the screen.
Caution messages are indicated for three seconds 
when you carry out operations to change 
camcorder settings. Adjustment execution 
messages are indicated while adjustments 
proceed. When adjustments are finished, 
messages showing the results of adjustments 
appear for three seconds.
Not only these indications are displayed on the 
viewfinder screen, but a menu setting enables 
them to be output as video signals. 
All items that can be displayed on the viewfinder 
screen are shown below.
Top of viewfinder screen
Extender settings
Indicates the setting of the digital extender 
function (by digital extender option) of this 
camcorder and the setting of the lens extender.
EX: The lens extender is on.
08: The lens shrinker is on.
x2D: The optional digital extender function of 
this camcorder is on.
Ex2D: The lens extender and the optional digital 
extender function of this camcorder are both 
on.
Zoom position (when the lens is 
mounted)
Indicates the zoom position of the zoom lens in 
the range from 0 to 99.
Focus position (when the serial lens is 
mounted)
Indicates the focus position as distance to the 
subject (in units of m or f).
Green tally
Lights when the camcorder is the following 
states.
• MAINTENANCE >Camera Config >HD-SDI 
Remote I/F is set to [G-Tally] in the setup menu 
and a recording control signal is output from the 
HD/SD SDI OUT connector.
• When the Picture Cache mode is enabled
Media status
Displays the name of the currently active media 
slot (A or B).
Recording mode/operation status
Indicates the current recording mode/operation 
status as follows.
Viewfinder Screen 
Display
Indication
Meaning
zREC
Recording in progress
STBY
Standby for recording
zCACHE
Standby in Picture Cache mode
zINT REC
Recording in progress in Interval 
Recording mode
zINT STBY Standby for next recording in 
Interval Recording mode
INT STBY
Standby in Interval Recording 
mode
zFRM REC Recording in progress in Frame 
Recording mode
zFRM 
STBY
Standby for next recording in 
Frame Recording mode
FRM STBY
Standby in Frame Recording mode
zS&Q REC
Recording in progress in Slow & 
Quick Motion mode
S&Q STBY
Standby in Slow & Quick Motion 
mode
zCALL
Being called from a connected 
device
BREVIEW
During recording review