Справочник Пользователя для Sony HDR-CX7E

Скачать
Страница из 109
93
Addi
tion
al
 I
n
fo
rm
at
io
n
when the battery pack is frequently used. Use 
the remaining battery time indication as a rough 
guide only.
• The E mark that indicates low battery flashes 
even if there are still 5 to 10 minutes of battery 
time remaining, depending on the operating 
conditions or ambient temperature.
About storage of the battery pack
• If the battery pack is not used for a long time, 
fully charge the battery pack and use it up on 
your camcorder once a year to maintain proper 
function. To store the battery pack, remove it 
from your camcorder and put it in a dry, cool 
place.
• To discharge the battery pack on your 
camcorder completely, touch 
 (HOME) 
 (SETTINGS) 
t [GENERAL SET] t 
[A.SHUT OFF] 
t [NEVER] and leave your 
camcorder in recording standby until the power 
goes off (p. 69).
About battery life
• Battery capacity decreases over time and 
through repeated use. If decreased usage time 
between charges becomes significant, it is 
probably time to replace it with a new one.
• Each battery’s life is governed by storage, 
operating and environmental conditions.
• x.v.Color is a more familiar term for the xvYCC 
standard proposed by Sony, and is a trademark 
of Sony.
• xvYCC is an international standard for color 
space in video. This standard can express a 
wider color range than the currently used 
broadcast standard.
On use and care
• Do not use or store the camcorder and 
accessories in the following locations:
– Anywhere extremely hot, cold or humid. 
Never leave them exposed to temperatures 
above 60 °C (140 °F), such as under direct 
sunlight, near heaters or in a car parked in the 
sun. They may malfunction or become 
deformed.
– Near strong magnetic fields or mechanical 
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The 
camcorder may not be able to record properly.
– Near AM receivers and video equipment. 
Noise may occur.
– On a sandy beach or anywhere dusty. If sand 
or dust gets in your camcorder, it may 
malfunction. Sometimes this malfunction 
cannot be repaired.
– Near windows or outdoors, where the LCD 
screen or the lens may be exposed to direct 
sunlight. This damages inside the LCD 
screen.
• Operate your camcorder on DC 6.8 V/7.2 V 
(battery pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories 
recommended in these operating instructions.
• Do not let your camcorder get wet, for example, 
from rain or sea water. If your camcorder gets 
wet, it may malfunction. Sometimes this 
malfunction cannot be repaired.
• If any solid object or liquid gets inside the 
casing, unplug your camcorder and have it 
checked by a Sony dealer before operating it 
any further.
• Avoid rough handling, disassembling, 
modifying, physical shock, or impact such as 
hammering, dropping or stepping on the 
product. Be particularly careful of the lens.
• Keep the POWER switch setting to OFF (CHG) 
when you are not using your camcorder.
• Do not wrap your camcorder with a towel, for 
example, and operate it. Doing so might cause 
heat to build up inside.
• When disconnecting the mains lead, pull it by 
the plug and not the lead.
• Do not damage the mains lead such as by 
placing anything heavy on it.
• Keep metal contacts clean.
• Keep the Remote Commander and button-type 
battery out of children’s reach. If the battery is 
accidentally swallowed, consult a doctor 
immediately.
• If the battery electrolytic liquid has leaked:
– consult your local authorized Sony service 
facility.
– wash off any liquid that may have contacted 
your skin.
About x.v.Color
About handling of your 
camcorder