Справочник Пользователя для Sony HVR-Z1E/Z1P
Recor
d
ing
Recording
29
Recording using
manual adjustments
manual adjustments
You can manually adjust the iris, gain, etc.
according to the brightness of the recording
scene or in order to obtain desired effects.
Adjust the iris, gain, shutter speed, and white
balance after setting the AUTO LOCK
switch to the center position to release the
auto lock mode.
Depending on the position of the AUTO
LOCK switch, you can hold or release the
settings of these functions.
according to the brightness of the recording
scene or in order to obtain desired effects.
Adjust the iris, gain, shutter speed, and white
balance after setting the AUTO LOCK
switch to the center position to release the
auto lock mode.
Depending on the position of the AUTO
LOCK switch, you can hold or release the
settings of these functions.
See page 27 for details on how to adjust the
white balance.
white balance.
b
Note
• If you want to set the exposure intentionally to other
than a proper level, adjust the iris, gain, and shutter
speed manually.
speed manually.
• If you adjust only one of either iris, shutter speed, or
gain manually, you can record with iris priority,
shutter speed priority, or gain priority, respectively.
shutter speed priority, or gain priority, respectively.
z
Tip
• To adjust the brightness of pictures, set all of the iris,
gain, and shutter speed to the manual adjustment
mode, then rotate the iris dial.
mode, then rotate the iris dial.
Adjusting the iris
You can manually adjust the light volume
entering the lens.
As the iris is opened (smaller aperture
values), the light volume increases. The
range of focus narrows and only the subject
appears in sharp focus.
As the iris is closed (larger aperture values),
the light volume decreases and the range of
focus widens.
entering the lens.
As the iris is opened (smaller aperture
values), the light volume increases. The
range of focus narrows and only the subject
appears in sharp focus.
As the iris is closed (larger aperture values),
the light volume decreases and the range of
focus widens.
1
During recording or in the standby
mode, set the AUTO LOCK switch to
the center position to release the auto
lock mode.
mode, set the AUTO LOCK switch to
the center position to release the auto
lock mode.
2
Press IRIS.
The current aperture value (F) appears.
3
Rotate the IRIS dial to a desired
aperture value.
aperture value.
The aperture value (F) varies from F1.6 to
F11, and Close, and the corresponding
value appears.
F11, and Close, and the corresponding
value appears.
Position
Purpose
AUTO LOCK
To adjust automatically.
Center (to
release the auto
lock mode)
release the auto
lock mode)
To adjust manually.
HOLD
Select this position after adjusting
the settings manually to retain
them.
the settings manually to retain
them.
IRIS dial