Справочник Пользователя для Sony SX34E

Скачать
Страница из 99
GB
About the remaining battery time 
indicator
When the power goes off even though the 
remaining battery time indicator indicates that 
the battery pack has enough power to operate, 
charge the battery pack fully again. Remaining 
battery time will be indicated correctly. Note, 
however, that the battery indication will not be 
restored if it is used in high temperatures for 
a long time, or if left in a fully charged state, 
or when the battery pack is frequently used. 
Use the remaining battery time indication as a 
rough guide only.
The  mark that indicates low battery flashes 
even if there are still 20 minutes of battery 
time remaining, depending on the operating 
conditions or ambient temperature.
About storage of the battery pack
If the battery pack is not used for a long time, 
fully charge the battery pack and use it up on 
your camcorder once a year to maintain proper 
function. To store the battery pack, remove it from 
your camcorder and put it in a dry, cool place.
To discharge the battery pack on your 
camcorder completely, touch 
 (MENU) 
 [Show others]  [POWER SETTINGS] 
(under   [GENERAL SET] category)  
[A.SHUT OFF]  [NEVER], and leave your 
camcorder in recording standby until the power 
goes off (p. 71).
About battery life
Battery capacity decreases over time and 
through repeated use. If decreased usage time 
between charges becomes significant, it is 
probably time to replace it with a new one.
Each battery’s life is governed by storage, 
operating and environmental conditions.
About handling of your camcorder
On use and care
Do not use or store the camcorder and 
accessories in the following locations:
Anywhere extremely hot, cold or humid. Never 
leave them exposed to temperatures above 
60 
C (140 °F), such as under direct sunlight, 
near heaters or in a car parked in the sun. 
They may malfunction or become deformed.
Near strong magnetic fields or mechanical 
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The 
camcorder may not be able to record properly.
Near AM receivers and video equipment. 
Noise may occur.
On a sandy beach or anywhere dusty. If 
sand or dust gets in your camcorder, it may 
malfunction. Sometimes this malfunction 
cannot be repaired.
Near windows or outdoors, where the LCD 
screen, or the lens may be exposed to direct 
sunlight. This damages the LCD screen.
Operate your camcorder on DC 6.8 V/7.2 V 
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories 
recommended in these operating instructions.
Do not let your camcorder get wet, for example, 
from rain or sea water. If your camcorder 
gets wet, it may malfunction. Sometimes this 
malfunction cannot be repaired.
If any solid object or liquid gets inside the 
casing, unplug your camcorder and have it 
checked by a Sony dealer before operating it 
any further.