Справочник Пользователя для Sony F35

Скачать
Страница из 142
12
Locations and Functions of Parts
  Chapt
er 1   
O
v
er
v
ie
w
1-3 Locations and Functions of Parts
1-3-1 Camera Head
Front panel
VF1 (viewfinder 1) connector (20-pin)
Connect a viewfinder (optional).
CONTROL PANEL connector
Connect with the CAMERA connector of the supplied 
assistant panel (page 17).
Accessory receptacles
Using these screw holes in combination with the accessory 
pockets (page 13) on the left side, you can fix a certain 
accessory to the left side of the camera.
VF2 (viewfinder 2) connector (20-pin)
Connect a second viewfinder (optional), e.g. for an 
assistant.
When two viewfinders are connected at the same time (via 
the VF1 and VF2 connectors), the HDVF-C950W cannot 
be used because of a limitation of current capacity.
LENS connector (12-pin)
To use a lens control unit (optional), connect it to this 
connector. You can control the iris of the lens through this 
connector.
Do not connect a device whose maximum rated current is 
500 mA or higher to the LENS connector.
Viewfinder shoe
Attach an optional viewfinder.
The height of the attaching position can be adjusted.
Flange focal length adjustment screw
You can adjust the flange focal length with the screw 
behind the cover.
Lens fixing lever
Turn the lever clockwise to secure the lens in the lens 
mount. To remove the lens, turn the lever 
counterclockwise.
Lens mount cap
Cover the lens mount with this cap when a lens is not 
attached. The cover may be removed by rotating the lens 
fixing lever counterclockwise.
Shutter emergency opening screw
You can forcibly open the shutter in an emergency.
CONTROL
PANEL
VF2
LENS
VF1
CONTROL PANEL connector
Accessory receptacles
VF2 connector
Viewfinder shoe
Lens mount
Lens mount cap
VF1 connector
Lens fixing lever
Flange focal length adjustment screw
Shutter emergency open screw
LENS connector
Ventilation holes (intake)
Ventilation holes (intake)
Note
Note