Справочник Пользователя для Sony F35

27

Preparing the Power Supply

  Cha

p

te

r 2  

 I

n

s

ta

llat
ion an

d Prep

ar

at

ions

When the supplied center handle is attached to the top of 
the camera head, you can attach the viewfinder to the 
viewfinder shoe of the center handle after removing the 
viewfinder shoe from the camera head.
The procedure for attaching the viewfinder is the same as 
when attaching it to the viewfinder shoe of the camera head 
(see page 24).

This camera operates on DC 12 V (10.5 to 17 V).

Connect a power supply to the DC IN connector (LEMO 
8-pin) of the camera head.
Use a commercially available shielded cable by attaching 
the supplied 8-pin connector for a power cable.

To turn on the camera
Set the CAM POWER switch of the camera head to the ON 
side, and the camera is turned on.
Power is also supplied to viewfinders connected to the VF1 
or VF2 connector and a device connected to the LENS 
connector of the camera head.
Power of 12 V or 24 V can be fed to accessories via the DC 
OUT connectors.

To supply power via the interface box (supplied) or a CA-
F101 Optical Fiber Camera Adapter (optional), mount the 
interface box or the CA-F101 to the rear of the camera 
head.
Connect a power supply to the DC IN connector (XLR 4-
pin) of the interface box or the CA-F101.

If the the interface box or the CA-F101 is mounted on top, 
power is not fed to the camera via the interface box or the 
CA-F101.

To turn on the camera
Set the CAM POWER switch of the camera head to the CA 
side, and the camera is turned on.
Power is also supplied to viewfinders connected to the VF1 
or VF2 connector and a device connected to the LENS 
connector of the camera head.

To use an AC power source
An AC power source can be connected, by using the AC-
DN2B AC Adaptor.

Attach the AC-DN2B to the interface box or the CA-
F101.