Справочник Пользователя для Sony F35
41
Basic Settings with the Subdisplay
Chapt
er
3
B
a
s
ic
A
d
jus
tment
tment
s
and Se
tt
ing
s
s
CAM: Optical reception level on the camera side
VTR: Optical reception level on the SRW-1 side
VTR: Optical reception level on the SRW-1 side
The status of the level is indicated with eight segments.
If 6 to 8 segments are lit: Normal
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
For details, refer to the Operation Manual of the CA-F101.
3-2-16 Limiting Pages that are
Displayed on the Subdisplay
Displayed on the Subdisplay
You can limit pages that are displayed on the subdisplay.
Use Setup mode of the subdisplay or the OPERATION
menu.
Use Setup mode of the subdisplay or the OPERATION
menu.
To set the subdisplay to Setup mode
Hold the PAGE button pressed for more than 5 seconds to
set the subdisplay to Setup page.
set the subdisplay to Setup page.
Subdisplay in Setup mode
Select the page to be switch ON/OFF on the first line and
select ON or OFF on the second line. Any page with an
OFF setting will not be displayed on the subdisplay.
select ON or OFF on the second line. Any page with an
OFF setting will not be displayed on the subdisplay.
To switch subdisplay pages ON/OFF using
the menu
the menu
You can also switch subdisplay pages ON/OFF using the
<PAGE SELECT> subpage that can be accessed from the
<SUBDISPLAY 2> page of the USER (OPERATION)
menu.
<PAGE SELECT> subpage that can be accessed from the
<SUBDISPLAY 2> page of the USER (OPERATION)
menu.
For details on how to operate the menu, see “4-2 Basic
Menu Operations” (page 64).
Menu Operations” (page 64).
<SUBDISPLAY 2> page
Move the pointer to PAGE SELECT then push on the
MENU SEL/ENTER dial to jump to the <PAGE
SELECT> subpage, where limitation of display pages can
be assigned.
MENU SEL/ENTER dial to jump to the <PAGE
SELECT> subpage, where limitation of display pages can
be assigned.
<PAGE SELECT> page
To switch ON/OFF, move the pointer to an item whose
setting you wish to change and push on the MENU SEL/
ENTER dial.
setting you wish to change and push on the MENU SEL/
ENTER dial.
Menu indication
Target page
SHUTTER
Shutter setting page
RAMP
RAMP operation page
FORMAT
Video-format selection page
ND
Optical filter selection page
GAIN/WHT/5600K Gain setting page
LENS FILE
Lens file selection page
TC/TAPE REM
Time code/tape remaining display page
VOLT/FAN
Voltage confirmation/Fan Operation
mode select page
mode select page
CHAR MIX
Character indication setting page
ASSIGN SW1/
SW2
SW2
Assignable buttons 1/2 setting page
ASSIGN SW3/
SW4
SW4
Assignable button 3/switch 4 setting
page
page
BRIGHT
Subdisplay brightness adjustment page
GAMMA TABLE
Gamma table selection page
COLOR SPACE
Color space selection page
OPITICAL LEVEL
Optical status page
SHUTTER
ON
<SUBDISPLAY 2> 12
LOCK SW MODE
LOCK SW MODE
CAMERA : -RUN
PANEL : FULL
B
PAGE SELECT
<PAGE SELECT> ESC
xx
SHUTTER :
B
ON
RAMP : ON
FORMAT : ON
ND : ON
GAIN/WHITE/5600K : ON
LENS FILE : ON
TIME CODE/TAPE REM : ON
VOLTAGE/FAN MODE : ON
CHARACTER MIX : ON
ASSIGNABLE SW1/SW2 : ON