Справочник Пользователя для Sony DXC-D30WS
2-2
DXC-D30WS/P(E)/V1
CAUTION
2-2-2. Cautions on Disassembly/Assembly of
Top Chassis
When removing the top chassis, following items should be
performed. If not, the connectors (CN503, CN504, CN505)
performed. If not, the connectors (CN503, CN504, CN505)
should be damaged.
Disassembly:
1. Disconnect the two connectors CN504 and CN505 on
1. Disconnect the two connectors CN504 and CN505 on
the CN-1594 board.
2. Remove the MB-785 board in the holizontal direction.
Because, not to break the connectors.
3. Disconnect the connector CN503.
4. Remove the SW-790 board.
2-3. REPLACEMENT OF MAIN PARTS
2-3-1. Replacement of CCD Unit
1. Remove the lens and viewfinder referring to the
instruction manual.
Note:
Attach a mount cap to the lens mount to
protect the prism block.
2. Remove the left side plate referring to Section 2-2-1.
“Removal of Side Plate”.
3. Remove two screws as shown in Figure.
Remove the AT-125 board. Disconnect the five
connectors CN2, CN105, CN106, CN107 and CN123
on the MB-785 board.
on the MB-785 board.
CN505
CN504
MB-785 board
CN503
CN1594
CN-503
CN-1594 board
SW-790 board
Front unit Ass'y
Screws
(B3
(B3
x
10: with washer)
Screws
(B3
(B3
x
4)
Screws
(B3
(B3
x
4)
Top chassis
Assembly:
1. Insert the partition to the rail of the upper board rail.
1. Insert the partition to the rail of the upper board rail.
K3
x
6
K3
x
6
Upper board
rail
rail
Top chassis
Partition
Upper board
rail
rail
Partition
2. After assembling the top chassis, assembly the front unit
Ass'y.